Sunix USB2312 USB 3.1 Enhanced SuperSpeed Dual ports PCI Express Host Card with Type-A Receptacle<\/p>\n
PCI Express Base Specification Revision 2.0 dual-lane (x2).
\nCompliant with Universal Serial Bus 3.1 specification Gen2.
\nCompliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
\nSupports simultaneous operation of multiple USB 3.1, 3.0, USB 2.0 and USB 1.1 devices.
\nSupports USB data transfer rate of 10G\/5G\/480\/12\/1.5 MBps.
\nExpands dual external USB 3.1 Super-Speed plus Type-A ports on the system.
\nUSB port supplies maximum +5VDC \/ 900mA power output to USB device.<\/p>\n
Specifications
\nHardware
\nBUS\tPCI Express Spec 2.0, Dual-Lane (x2)
\nController\tPCI Express USB 3.1 Host controller, Asmedia ASM1142
\nUSB Standard\teXtensible Host Controller Interface (xHCI) Rev1.1
\nIRQ & IO\tAssigned by System
\nUSB Communication
\nInterface\tUniversal Serial Bus 3.1 \/ 3.0 \/ 2.0 \/ 1.1
\nSpeed\tSuperSpeed+(10GBps), SuperSpeed(5GBps), High Speed (480MBps), Full Speed (12MBps), Low Speed (1.5MBps)
\nNo. of Port\t2-port
\nPCB Connector\tUSB 3.1 USB Type-A port
\nProtection\t\u00c2\u00b115KV IEC61000-4-2 Air Gap Discharge
\n\u00c2\u00b18KV IEC61000-4-2 Contact Discharge
\nPower
\nSource\tPCIe Bus Power
\nOutput Capacity\tUSB Type-A Port:
\n+5VDC \/ Maximum 0.9A \/ each port
\nNote: Total power output capacity will be limited by system power supply.
\nOver Current Protection\tUSB Type-A Port:
\n+6VDC \/ 1.1A \/ each port \/ PTC Fuse
\nPower Consumption\t1.1 W @ 3.3V (board only without power output to USB device)
\nDriver Support
\nWindows\tWindows 7 (X86\/X64)
\nWindows 8.x \/ 10 (X86\/X64) (Windows in-box driver)
\nLinux\tLinux 2.6.31 or later (Linux OS already implemented USB 3.0 driver)
\nEnvironment
\nOperation Temperature\t0 to 60\u00c2\u00b0C (32 to 140\u00c2\u00b0F)
\nOperation Humidity\t5 to 95% RH
\nStorage Temperature\t-20 to 70\u00c2\u00b0C (-4 to 158\u00c2\u00b0F)
\nRegulatory Approvals
\nEMC\tCE, FCC, VCCI, BSMI
\nGreen\tRoHS, CRoHS, WEEE
\nPhysical Characteristics
\nPCB Dimension\t79.3 x 68.5 mm
\nBracket\tStandard 120 mm (Low Profile 80mm)
\nBracket Space\t1<\/p>\n","protected":false},"excerpt":{"rendered":"
sunix-usb2312-usb-3-1-enhanced-superspeed-dual-ports-pci-express-host-card-with-type-a-receptacle Continue reading